Weak alkaline, extremely strong foaming cleaning concentrate based anionic and amphoteric surfactants for car washes, portal systems and SB washing boxes. Very well suited for biological water treatment plants.
Lotus ULTRA Power Foam is a mildly alkaline, extremely strong foaming cleaning concentrate based anionic and amphoteric surfactants for car washes, portal systems and SB washing boxes. Novel complexing and dispersing agents and a special brush lubricant to protect painted edges ensure an optimal foaming and a gentle cleaning. The innovative fragrance ensures all
facilities for pleasant fresh scent. Foam active even in hard water!
The surfactants used in accordance with the detergent regulation 648/2004 and within 28 days from primary> 80% biodegradable.
Mode of action:
Lotus ULTRA Power foam is due to its novel anti dirt formula suited as purifying active foam in the car wash. The lotus effect is already effective in the foam sheet. Novel, extremely powerful dispersant and Kalkinhibitoren enable easy-to-clean effect. This effectively prevents. Limescale and greyness in further washing process. Detached dirt particles in
domestic water storage is no longer on the surface. The re-soiling is
In washes and portal systems solution is produced with compressed air, the effective foam using the foam generator of an approximately 0.5-1%. This action can be foam plant side of voluminous-dry to aqueous-running off to adjust. In car washes and portal systems, we recommend an aqueous-running setting. In self-service area of the foam at the request can be set very voluminous and dry. This naturally increases the rinsing time, which certainly meets the customer
Lotus ULTRA Power Foam is a highly concentrated with a maximized content of washing-active substances. This results in an excellent dirt and grease dissolving effect, even with particularly heavy soiling.
The product is highly recommended with a view to clean brushes.
Application in the foam direction:
Pur-1: 25 pre-diluted via a dosing pump or 1:50 prediluted via an injector of foam towards out.
Application in HD device:
Depending on the type and setting of the device 1: 5 - 1:50 pre-diluted
application in the spray :
1: 100 - 1: 200 spray large areas prediluted with water, thereby wetting the vehicle well.
do not let it dry foam. Wash with rotating brush
Approximately 4-8 ml per vehicle for use in the foam direction